Emlid Reach RS3

Emlid SKU: EML-RC-RS3

Introducing Reach RS3 from Emlid, a multi-band GNSS receiver offering centimeter-level accuracy. It supports GPS, GLONASS, Galileo, BeiDou, and QZSS with 4G/LTE, LoRa, and up to 30 hours of battery life for demanding survey tasks.


Multi-Band Base & Rover


IMU Tilt Compensation


LTE Modem


Dual-Band Radio



Price:
$2,799
+ FREE SHIPPING
Stock:
In Stock & Ready to Ship
EAN: 5999574730190

The Emlid Reach RS3 is a state-of-the-art GNSS receiver delivering centimeter-level accuracy in seconds. It features multi-band RTK with GPS, GLONASS, Galileo, BeiDou, and QZSS, ensuring reliable performance anywhere. With 4G/LTE, LoRa, and a 30-hour battery life, it's designed for the most demanding survey tasks.

Accurate Results even with Large Tilt Angles

The IMU-based tilt compensation in Reach RS3 enables you to make measurements with up to 60 degrees of tilt while still staying within 20 mm of accuracy.

Reach RS3 continuously measures and corrects tilt in real-time to keep you on target.

Survey and Stakeout Faster

No need to check the bubble

Effortless and Robust

IMU Tilt Compensation

Calibration-Free
Inertial measurement unit are calibrated in each device individually at the factory, so you can get your Reach RS3 up and running right out of the box.

Immune to Magnetic Disturbances
Unaffected by magnetic fields, RS3’s IMU sensors provide robust tilt compensation even when working close to metal structures.

Quick Initialization
Tilt initialization takes about 20 meters of walking or 10-20 seconds of tilting. Usually ready on the way from the car.

Rapid and Reliable GNSS receiver

Gets a fix in 5 seconds

Reach RS3 gets a centimeter-accurate solution in about 5 seconds. It maintains robust performance even when the sky view is partially obstructed, or the receiver itself is tilted.

GPS/QZSS, GLONASS, BeiDou, and Galileo
L1C/A, L2C, L1OF, L2OF,B1I, B2I, E1B/C, E5b

RINEX logging and PPP support

Record raw data in the RINEX format for post-processing. You can use our free PPK software, Emlid Studio, or any other software that supports RINEX. Logs are also compatible with OPUS, AUSPOS, and PPP services, so you can get highly accurate results anywhere in the world.

16 GB storage
160+ days of logging at 1 Hz

Up to 22 hours on 1 charge

Reach RS3 comes equipped with a built-in, industrial-grade battery that can endure up to 22 hours of logging or 18 hours of working with tilt in RTK. For uninterrupted multi-day operation, simply connect a power bank, just like you would with your mobile phone.

Charging via USB-C

Built-in LTE Modem

Insert a SIM card into your Reach RS3 and let it broadcast or receive corrections via NTRIP.

Get Corrections from CORS, Reach, or 3rd-Party Base

NTRIP

Base and Rover

Work in RTK with VRS or a single baseline CORS network. You
can also connect another GNSS receiver as an NTRIP base using Emlid NTRIP Caster.

Compatibility

Any receiver with RTCM3 support

Dual-Band Radio

LoRa 868/915 MHz - Base and Rover

Perfect for areas with no internet coverage for NTRIP. LoRa is used when connecting Emlid receivers over the radio.

Compatibility

All Emlid receivers with built-in radio

UHF 450 MHz - Rover

An option to mix and match RTK receivers within your fleet. You can configure your Reach RS3 to receive corrections from an existing base*.
You can also use a high-power external radio on your Reach base and connect with the UHF radio receiver in Reach RS3.

Compatibility

Bases with radios that
transmit TRIMTALK 450S**

*Requires a 410-470 MHz antenna, sold separately
**TRIMTALK is a trademark of Trimble Inc.

Comes with Software for the Field and the Office

Emlid Flow

Emlid Flow efficiently manages all field-related tasks, including receiver configuration, RINEX logging, data collection, and stakeout. Available or iOS and Android.

Emlid Flow 360

You can access your survey data via the cloud-based Emlid Flow 360. It allows you to prepare, manage, and export your projects from a browser.

The basic features are available for free to all users. Upgrade your Emlid Flow and Flow 360 with a single subscription.

Emlid Studio

A free post-processing software for macOS and Windows.

Learn more about Emlid Studio here.

Emlid Caster

Connect up to 10 rovers to your base station via the internet or set up your own NTRIP network with Emlid Caster.

Learn more about Emlid Caster here.

Rugged and compact

126 x 126 x 142 mm | 950 g

IP67
RS3 is waterproof up to a one meter depth. Silicone plugs completely seal and protect all connectors from water and dust.

-20 to +65 ºС
Extensively tested in conditions that simulate coldest winters and hottest summers.

Industrial Battery
The Reach RS3 Li-Ion battery handles high and low temperatures well and over 2000 cycles of charging and discharging while maintaining its original capacity. While others are hot-swapping batteries, your Reach just keeps working.

Impact-Resistant
The body of the Reach RS3 is made of polycarbonate and coated with elastomer. The combination of these materials makes your Reach RS3 drop resistant and ready for the harshest conditions.

Which Emlid Receiver Should I Choose?

The Emlid Reach RS3 is a state-of-the-art GNSS receiver delivering centimeter-level accuracy in seconds. It features multi-band RTK with GPS, GLONASS, Galileo, BeiDou, and QZSS, ensuring reliable performance anywhere. With 4G/LTE, LoRa, and a 30-hour battery life, it's designed for the most demanding survey tasks.

Accurate Results even with Large Tilt Angles

The IMU-based tilt compensation in Reach RS3 enables you to make measurements with up to 60 degrees of tilt while still staying within 20 mm of accuracy.

Reach RS3 continuously measures and corrects tilt in real-time to keep you on target.

Survey and Stakeout Faster

No need to check the bubble

Effortless and Robust

IMU Tilt Compensation

Calibration-Free
Inertial measurement unit are calibrated in each device individually at the factory, so you can get your Reach RS3 up and running right out of the box.

Immune to Magnetic Disturbances
Unaffected by magnetic fields, RS3’s IMU sensors provide robust tilt compensation even when working close to metal structures.

Quick Initialization
Tilt initialization takes about 20 meters of walking or 10-20 seconds of tilting. Usually ready on the way from the car.

Rapid and Reliable GNSS receiver

Gets a fix in 5 seconds

Reach RS3 gets a centimeter-accurate solution in about 5 seconds. It maintains robust performance even when the sky view is partially obstructed, or the receiver itself is tilted.

GPS/QZSS, GLONASS, BeiDou, and Galileo
L1C/A, L2C, L1OF, L2OF,B1I, B2I, E1B/C, E5b

RINEX logging and PPP support

Record raw data in the RINEX format for post-processing. You can use our free PPK software, Emlid Studio, or any other software that supports RINEX. Logs are also compatible with OPUS, AUSPOS, and PPP services, so you can get highly accurate results anywhere in the world.

16 GB storage
160+ days of logging at 1 Hz

Up to 22 hours on 1 charge

Reach RS3 comes equipped with a built-in, industrial-grade battery that can endure up to 22 hours of logging or 18 hours of working with tilt in RTK. For uninterrupted multi-day operation, simply connect a power bank, just like you would with your mobile phone.

Charging via USB-C

Built-in LTE Modem

Insert a SIM card into your Reach RS3 and let it broadcast or receive corrections via NTRIP.

Get Corrections from CORS, Reach, or 3rd-Party Base

NTRIP

Base and Rover

Work in RTK with VRS or a single baseline CORS network. You
can also connect another GNSS receiver as an NTRIP base using Emlid NTRIP Caster.

Compatibility

Any receiver with RTCM3 support

Dual-Band Radio

LoRa 868/915 MHz - Base and Rover

Perfect for areas with no internet coverage for NTRIP. LoRa is used when connecting Emlid receivers over the radio.

Compatibility

All Emlid receivers with built-in radio

UHF 450 MHz - Rover

An option to mix and match RTK receivers within your fleet. You can configure your Reach RS3 to receive corrections from an existing base*.
You can also use a high-power external radio on your Reach base and connect with the UHF radio receiver in Reach RS3.

Compatibility

Bases with radios that
transmit TRIMTALK 450S**

*Requires a 410-470 MHz antenna, sold separately
**TRIMTALK is a trademark of Trimble Inc.

Comes with Software for the Field and the Office

Emlid Flow

Emlid Flow efficiently manages all field-related tasks, including receiver configuration, RINEX logging, data collection, and stakeout. Available or iOS and Android.

Emlid Flow 360

You can access your survey data via the cloud-based Emlid Flow 360. It allows you to prepare, manage, and export your projects from a browser.

The basic features are available for free to all users. Upgrade your Emlid Flow and Flow 360 with a single subscription.

Emlid Studio

A free post-processing software for macOS and Windows.

Learn more about Emlid Studio here.

Emlid Caster

Connect up to 10 rovers to your base station via the internet or set up your own NTRIP network with Emlid Caster.

Learn more about Emlid Caster here.

Rugged and compact

126 x 126 x 142 mm | 950 g

IP67
RS3 is waterproof up to a one meter depth. Silicone plugs completely seal and protect all connectors from water and dust.

-20 to +65 ºС
Extensively tested in conditions that simulate coldest winters and hottest summers.

Industrial Battery
The Reach RS3 Li-Ion battery handles high and low temperatures well and over 2000 cycles of charging and discharging while maintaining its original capacity. While others are hot-swapping batteries, your Reach just keeps working.

Impact-Resistant
The body of the Reach RS3 is made of polycarbonate and coated with elastomer. The combination of these materials makes your Reach RS3 drop resistant and ready for the harshest conditions.

Which Emlid Receiver Should I Choose?

Emlid Reach RS3 Specifications

Mechanical

Dimensions 126 x 126 x 142 mm
Weight 950 g
Operating Temperature
-20 to +65 ºC
Ingress protection IP67

Electrical

Autonomy 16 hrs as LTE RTK rover,
22 hrs logging
Battery Li-Ion 5200 mAh, 7.2
V37.44 Wh
Charging USB Type-C 5 V, 3 A

Positioning

Static H: 4 mm + 0.5 ppm
V: 8 mm + 1 ppm
PPK H: 5 mm + 0.5 ppm
V: 10 mm + 1 ppm
RTK H: 7 mm + 1 ppm
V: 14 mm + 1 ppm
Convergence time ~5 s typically

Connectivity

Radio

LoRa - Transmit and receive
Frequency range: 868/915 MHz
Power: 0.1 W
Distance: Up to 8 km

UHF* - Receive only
Frequency range: 410–470 MHz
Protocols: TRIMTALK 450S**
Modulation type: GMSK

LTE modem Regions: Global
Bands: FDD-LTE: 1, 2, 3, 4, 5,
7, 8, 12, 13,
18, 19, 20, 26, 28, 66
TD-LTE: 38, 40, 41
UMTS (WCDMA/FDD):
1, 3, 2, 4, 5, 6, 8, 19
Quad-band, 850/1900
900/1800 MH
SIM card: Nano-SIM
Wi-Fi 802.11 b/g/n
Bluetooth 4.0/2.1 EDR
Ports RS-232, USB Type-C

Data

Corrections NTRIP, RTCM3
Position output NMEA, LLH/XYZ
Data logging RINEX, NMEA, LLH/XYZ, UBX
Internal storage 16 GB

GNSS

Signal tracked GPS/QZSS L1C/A, L2C,
GLONASS L1OF, L2OF,
BeiDou B1I, B2I, Galileo
E1B/C, E5b
Number of channels 184
Update rates up to 10 Hz
IMU 6DOF

Introducing Reach RS3 with tilt compensation

How RTK Works

(1) Reach RS3
(1) Carrying Case with a Strap
(1) Radio Antenna
(1) USB Type-C Cable

Frequently Bought Together


Customer Reviews


Payment & Security

American Express Apple Pay Diners Club Discover Meta Pay Google Pay Mastercard PayPal Shop Pay Venmo Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Calculate Shipping

Most Commonly Purchased With

Your Recently Viewed Products

World-Class Reputation

We obsess over the customer experience, which is why more people choose Advexure.

Our Team of SMEs

Our team of drone experts makes us an industry partner you can count on.

10 Years of Experience

Our multi-facet equipment and full resource solution approach has earned us success in many industries.