DJI Manifold 3 delivers an exceptional 100 TOPS of computing performance in a compact, lightweight design weighing just 120 g. Seamlessly integrating with the Matrice 400 and Matrice 4 Series drone platforms, it enhances onboard processing for flight control, gimbal operation, and camera management—boosting overall efficiency across demanding missions.
Built with a developer-friendly environment, Manifold 3 enables the creation of powerful, high-performance applications for a wide range of use cases, including energy inspections, public safety operations, and more.
DJI Manifold 3
Enterprise-Grade Onboard Computing for DJI Drones
Unlock powerful edge AI and onboard data processing with the DJI Manifold 3 — a compact yet high-performance embedded computing platform designed to enhance the capabilities of DJI enterprise series aircraft. Built for demanding inspection, surveying, geospatial analysis, and automation missions, the Manifold 3 delivers real-time computing at the edge without compromising aircraft performance or reliability.
Key Features
High-Performance Edge Computing
• Up to 100 TOPS of computing power (INT8), ideal for AI workflows, sensor fusion, and autonomous logic execution on board.
Compact & Lightweight Design
• Weighs ~120 g with a small footprint, minimizing impact on flight time and handling.
Robust Memory & Storage
• 16 GB LPDDR5 RAM and 256 GB SSD for fast data storage, processing, and logging.
Enterprise Compatibility
• Designed to integrate seamlessly with DJI Matrice 400, Matrice 4 Series, and Matrice 4D Series platforms via E-Port (E1/E2/E3). *On Matrice 400, Manifold 3 only supports the E1, E2, and E3 ports of the E-Port V2, with E3 being the recommended option.
Developer-Friendly Platform
• Full support for DJI Payload SDK (PSDK) and Onboard SDK v5.0 for building custom AI, mapping, inspection, and automation applications.
Connectivity & I/O
• E-Port V2 for power/data, USB-C (USB 3.2 Gen 1) for peripherals, and support for external sensors, drives, and networks.
Durable & Field-Ready
• IP55 rated for dust/water tolerance and equipped to operate in temperatures from -20 °C to 50 °C (-4° to 122° F).
DJI Manifold 3
Enterprise-Grade Onboard Computing for DJI Drones
Unlock powerful edge AI and onboard data processing with the DJI Manifold 3 — a compact yet high-performance embedded computing platform designed to enhance the capabilities of DJI enterprise series aircraft. Built for demanding inspection, surveying, geospatial analysis, and automation missions, the Manifold 3 delivers real-time computing at the edge without compromising aircraft performance or reliability.
Key Features
High-Performance Edge Computing
• Up to 100 TOPS of computing power (INT8), ideal for AI workflows, sensor fusion, and autonomous logic execution on board.
Compact & Lightweight Design
• Weighs ~120 g with a small footprint, minimizing impact on flight time and handling.
Robust Memory & Storage
• 16 GB LPDDR5 RAM and 256 GB SSD for fast data storage, processing, and logging.
Enterprise Compatibility
• Designed to integrate seamlessly with DJI Matrice 400, Matrice 4 Series, and Matrice 4D Series platforms via E-Port (E1/E2/E3). *On Matrice 400, Manifold 3 only supports the E1, E2, and E3 ports of the E-Port V2, with E3 being the recommended option.
Developer-Friendly Platform
• Full support for DJI Payload SDK (PSDK) and Onboard SDK v5.0 for building custom AI, mapping, inspection, and automation applications.
Connectivity & I/O
• E-Port V2 for power/data, USB-C (USB 3.2 Gen 1) for peripherals, and support for external sensors, drives, and networks.
Durable & Field-Ready
• IP55 rated for dust/water tolerance and equipped to operate in temperatures from -20 °C to 50 °C (-4° to 122° F).
| Product Name | Manifold 3 |
| Weight | 120 ± 5 g |
| Dimensions (L×W×H) | 98 × 57 × 36 mm |
| Rated Power | 33 W |
| Supported Model |
DJI Matrice 400 DJI Matrice 4 Series DJI Matrice 4D Series |
| Memory |
16GB LPDDR5 |
| Storage |
256GB SSD |
| Computing Power |
Up to 100 TOPS *Measured using the INT8 computation precision standard, based on a sparse computing model. |
| Interface |
E-Port Interface: Supports DJI Matrice 400 E-Port V2 interface * On Matrice 400, Manifold 3 only supports the E1, E2, and E3 ports of the E-Port V2, with E3 being the recommended option. |
| Operating Temperature |
-20° to 50° C (-4° to 122° F) |
| Storage Temperature |
-20° to 60° C (-4° to 140° F) |
| Ingress Protection Rating |
IP55 Measured under controlled conditions. The rating is not permanently effective and may decrease due to product wear and tear. |
| E-Port Power Supply |
Matrice 400 E-Port V2: 24V Input |
| USB Power Delivery (PD) |
You can use a power adapter that supports the PD protocol to supply power via the USB-C interface. |
(1) DJI Manifold 3
(Accessory kits or drone platform mounts sold separately unless bundled.)
Which drone platforms is Manifold 3 compatible with?
Manifold 3 is compatible with DJI Matrice 400, the DJI Matrice 4 Series, and the DJI Matrice 4D Series drone platforms.
What can I do with Manifold 3?
You can install application packages from the third-party ecosystem, such as software for power grid, river, and pipeline inspections, to enhance efficiency in specific scenarios.
If you are a developer, you can use the PSDK open interface and CUDA computing components provided by Manifold 3 to develop AI applications for drones. You can then apply for mass production review and listing in DJI's Ecosystem Products Catalogue to promote your application.
What is the difference between Manifold 3 and Manifold 2?
Compared to Manifold 2, Manifold 3 boasts a significant increase in computing power (up to 100 TOPS), accompanied by an impressive weight reduction to just about 120 g. It also offers more convenient installation brackets and connectivity options. The system software supports Jetpack 5.1.3 and Ubuntu 20.04, and offers a new version of the PSDK with package management capabilities, allowing users to install and update third-party applications via DJI Pilot for a more user-friendly experience.
How to export the data files from Manifold 3?
You can export data files via the following three options:
1. Install and connect Manifold 3 to the drone platform. Connect an external USB flash drive or portable SSD to Manifold 3 via its USB-C interface, and then use the DJI Pilot app to choose the relevant application and export your data.
2. Install and connect Manifold 3 to the drone platform. Connect the drone platform and your computer with a USB-C cable. Open DJI Assistant 2 to automatically mount Manifold 3's system file directory, then use Windows Explorer to select and copy the data you want to export.
3. Install and connect Manifold 3 to the drone platform. Use third-party applications to export data, such as downloading playback from the Pilot media library or transferring data to a specified cloud platform. Follow the third-party application's instructions for detailed export methods.
If you are a developer, in addition to the three aforementioned means, you can also transfer data during the development and debugging phase through SSH or SFTP protocol channels.
What is the Manifold PSDK Application?
The Manifold PSDK Application is software developed for Manifold 3 based on the DJI PSDK interface. It is also known as the Manifold Application, and its installation packages are suffixed with ".dpk".
Frequently Bought Together
Customer Reviews
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.



