Unparalleled Vision, Day or Night

The all-weather, multi-sensor flagship Zenmuse H30T Five-Sensor Camera integrates five major modules—a wide-angle camera, a zoom camera, an infrared thermal camera, a laser rangefinder, and an NIR auxiliary light. Employing cutting-edge intelligent algorithms, it revolutionizes perception and imaging standards, transcending the limitations of day and night vision. This makes it effortlessly suitable for a variety of operations including public safety, energy inspection, water conservation, and forestry.

All-Weather, Full-Day and Multi-Sensor Flagship Payload

• Wide Camera: 48 MP 1/1.3" CMOS (24mm Focal Length)
• Zoom Camera: 40 MP 1/1.8" CMOS (34x Optical Zoom, 400x max digital zoom)
• Laser RangeFinder: 3 km (~9842 ft) Range
• Radiometric Thermal Camera: 1280x1024 (52mm Focal Length)
• NIR Auxiliary Light: Provides better auxiliary illumination for zoom camera
  

Further and Clearer Vision

Up to 34× Optical Zoom‌ and 400× Digital Zoom

The Zenmuse H30 Series features a high-resolution 40MP zoom camera, supporting up to 34× optical zoom and an incredible 400× digital zoom. Compared to the previous generation, it not only observes subjects at greater distances but also captures more details.

More Stable Imagery from the Zoom Camera

With DJI's latest image stabilization algorithm, the Zenmuse H30 Series can effectively diminish shake in telephoto footage, delivering stable and clear imagery for detailed power line inspections.

Max 3000m Laser Range Finder

The laser range finder boasts a measurement range up to 2.5 times greater than the previous generation, [3] accurately capturing the position information of subjects within a range from 3 m to 3000 m, including linear distance from the camera, altitude, and GPS coordinates.

Enhanced Night Vision

Supports Full-Color Night Vision

Both the zoom and wide-angle cameras of the Zenmuse H30 Series can switch to Night Scene mode in low-light conditions, enhancing live view and recording quality. This ensures operational efficiency and accuracy at night, enabling continuous operation from day to night.

Supports Black and White Night Vision and NIR Illumination

In Night Scene mode, the Zenmuse H30 Series zoom camera supports IR Light for infrared enhancement and NIR illumination. It switches the live feed to a grayscale image by removing the IR filter, thereby strengthening the contrast between light and dark areas, making it easier to locate subjects. When the NIR auxiliary light is enabled, the zoom camera can benefit from additional NIR illumination, which is especially helpful for covert night surveillance and search-and-rescue operations.

More Powerful Infrared Performance

1280×1024 Infrared Resolution

The infrared thermal camera boasts a resolution of 1280×1024, 4× the previous generation, with up to 32× digital zoom. This allows for both an overview of the entire scene and the ability to zoom in on specific areas. At higher zoom levels, the Zenmuse H30T automatically activates a UHR (Ultra-High Resolution) Infrared Image function, ensuring the infrared images remain clear.

High-Res Mode for Precise Observation

Zenmuse H30T supports three infrared gain modes: High Gain mode for more precise temperature measurement, Low Gain mode for a wider temperature measurement range, and the new High-Res mode, which is especially useful for observing objects, people, or animals with small temperature differences, making it highly practical for security, emergency, and search-and-rescue operations.

Visual and IR Cameras Simultaneous Zoom

The Zenmuse H30T's zoom camera and infrared thermal camera support Link Zoom, allowing operators to scale the visible light and thermal images in tandem and maintain the same viewpoint. This side-by-side comparison of image details helps locate the subject faster, increasing efficiency while saving effort.

Temperature Measurement Range from -20° to 1600° C (-4° to 2912° F)

With the installation of an infrared density filter, the infrared thermal camera can measure temperatures up to 1600° C (2912° F), 3× the previous generation. This is particularly useful for firefighting and high-temperature operations as it allows for more effective judgment of temperature changes and rapid locating of hotspots, increasing rescue efficiency.

Smarter Multi-Scenario Operations

Smart Capture for Improved Imaging

In Night Scene mode, the Zenmuse H30 Series zoom camera supports IR Light for infrared enhancement and NIR illumination. It switches the live feed to a grayscale image by removing the IR filter, thereby strengthening the contrast between light and dark areas, making it easier to locate subjects. When the NIR auxiliary light is enabled, the zoom camera can benefit from additional NIR illumination, which is especially helpful for covert night surveillance and search-and-rescue operations.

Electronic Dehazing

In conditions such as smog or high atmospheric humidity, the Zenmuse H30 Series zoom camera employs a new Electronic Dehazing function to enhance image clarity. It offers low and high dehazing levels to suit different operational environments and requirements.

Superior Environmental Adaptability

IP54 Ingress Protection

With an IP54 dust and water resistance rating, the Zenmuse H30 Series can operate safely and reliably even in harsh working conditions.

-20° to 50° C (-4° to 122° F) Operating Temperature

The Zenmuse H30 Series is built to work in temperatures ranging from -20° to 50° C (-4° to 122° F), meeting all-weather operational needs.

More Reliable Information Sync and Retention

Supports Pre-Recording

All cameras of the Zenmuse H30 Series, including the zoom, wide-angle, and infrared thermal cameras, support pre-recording. They can retain footage from 10, 15, or 30 seconds before the formal recording starts, ensuring a more complete record and capturing key information that may otherwise be quickly lost.

Media and Transmission Encryption with One-click Log Clearance

The Security Code function allows for the encryption of microSD cards, fully protecting your files. AES-256 encryption technology ensures the security of data transmission between the remote controller and the aircraft. Additionally, it supports one-click log clearance to prevent information leaks.

Cloud Information Sync for Collaborative Ground and Air Operations

Operators can check live views from the Zenmuse H30 Series through the cloud platform on DJI FlightHub 2 to stay up to date with on-site dynamics. This enables rapid remote command and facilitates coordinated air-to-ground operations.

Zenmuse H30T Intelligent Camera Functions

Click to Aim: No more having to waste time trying to use your gimbal yaw and tilt controls, simply double-click on the point of interest and your camera/gimbal will automatically move to the point of interest.

Smart Track: Identify and follow moving subjects like people, vehicles, and boats with the auto-zoom function, while continuously acquiring the subject’s dynamic location.

High-Res Grid Photo: This function allows you to take an overview photo using the wide camera sensor, and using the zoom camera, a set of 40 MP images will be captured of the grid area. This allows you to efficiently be able to observe a subject and easily be able to view the subject in greater detail.

Night Scene: This function provides great vision benefits in low-light environments with enhanced noise reduction and IR light options.

Zenmuse H30T Specs

General

Gimbal

Zoom Camera

Wide Camera

NIR Auxiliary Light

Infrared Thermal Camera

Laser Rangefinder

NIR Auxiliary Light

Special Features

Data Storage

Post-Processing Softwarec

(1) H30T Gimbal & Camera
(1) Lexar Professional 1066x UHS-I microSDXC Memory Card 64GB
(1) Storage Case
(1) Lens Cleaning Cloth

This is the Zenmuse H30 Series

DJI Matrice 300 RTK (with DJI RC Plus only)
DJI Matrice 350 RTK

What flight platform is Zenmuse H30 Series compatible with？Which PTZ interface can it be mounted to?
Zenmuse H30 Series is compatible with Matrice 350 RTK, Matrice 300 RTK, but only with DJI RC Plus. Before using, please update the aircraft and remote controller to the latest firmware version.  You can mount the payload to any position on the gimbal.

Onto which gimbal port can I mount a Zenmuse H30 Series payload?？
Either of the Zenmuse H30 Series payloads can be mounted onto any gimbal port on the Matrice 350 RTK or Matrice 300 RTK.

How many models exist for the Zenmuse H30 Series？
There are 2 models in total for H30 series: H30 (4 sensors: wide-angle camera, zoom camera, LRF and NIR auxiliary light) and H30T (5 sensors: wide-angle camera, zoom camera, LRF, thermal camera and  NIR auxiliary light).

What's included in the DJI Zenmuse H30T Bundle? 
Click on the In the Box tab for a full list of what's included.

What is the difference between Zenmuse H30 Series and Zenmuse H20 Series？

1. Superior Visible Light capability: with 34x of maximum optical zoom and 400x maximum digital zoom.
2. Improvement in thermal camera: resolution improved from 640 × 512 to 1280 × 1024. Support High-Res mode better observation effects on objects with small temperature differences; the temperature measurement range is increased to -20℃ to 1600℃* ~(-68°F to 2912°F)*.
3. Improvement in Night Scene mode, offering settings at 25fps, 15fps, 5fps. Support NIR auxiliary light illumination.
4. LRF detection range up to 3000m (~9842ft).
5. Support Smart Capture mode.
6. Support electronic dehazing.
7. Support Video Foreground Stabilization for more reliable tower inspections and more. 

What is the protection level of Zenmuse H30 Series products??
Under controlled laboratory conditions, the Zenmuse H30 Series can achieve an IP54 protection rating according to the IEC60529 standard. The IP rating is not permanently effective and may decrease over time due to product wear and tear.

What is the zoom ratio of the Zenmuse H30 Series?
Up to 34× optical zoom and 400× digital zoom.

What are the photo resolutions of the Zenmuse H30 Series cameras?
Zoom Camera:
7328×5496, 3664×2748
Wide-Angle Camera:
8064×6048, 4032×3024
Infrared Thermal Camera:
1280×1024

What video formats are supported by the Zenmuse H30 Series?
MP4, and H.264, and H.265 codecs.

What is the difference between VBR and CBR in video bitrate settings?
VBR stands for Variable Bitrate, which features lower bitrates for static scenes and higher bitrates for dynamic ones. This ensures optimal image quality across various shooting scenarios but requires a microSD card capable of handling peak bitrates. CBR stands for Constant Bitrate, where the bitrate remains fixed regardless of the scene, and the write speeds for the microSD card are more consistent.

What is the new pre-recording feature of the Zenmuse H30 Series? What is it for?
Pre-recording is a feature that allows the device to cache a segment of video for a set duration before the user starts recording. When recording begins, the cached content is included in the video, preventing excessive use of microSD card space.

Purpose: With pre-recording enabled, even if recording starts after an event has begun, the device can save the moments before the recording started onto the microSD card, ensuring that potentially critical information isn't missed.

What is the maximum video recording time of the Zenmuse H30 Series?
Two hours. Recording will automatically stop after two hours.

Is the Zenmuse H30 Series compatible with the DJI FlightHub 2 cloud platform?
Yes.

What are some precautions that I should keep in mind when using the Zenmuse H30 Series?

1. Do not aim the camera lens at high-energy power sources, such as the sun, lava, or laser beams. The temperature of the observed subjects should not exceed 800° C (1472° F) (when the Infrared Density Filter is not installed). Otherwise, it will burn the infrared sensor and cause irreversible damage
2. Do not place the product under direct sunlight, in areas with poor ventilation, or near a heat source such as a heater.
3. Do not repeatedly power the gimbal and camera on or off. After powering off, wait at least 30 seconds before powering back on. Otherwise, it may affect the service life of camera chips.
4. Do not hot-swap the microSD card during use.
5. Do not touch the surface of the lens with your hand. Be careful to avoid scratching the surface of the lens with sharp objects. Otherwise, the quality of images may be affected.
6. Clean the surface of the camera lens with a soft, dry, clean cloth. Do not use alkaline detergents.
7. Store the payload in a safety box, and keep it dry and ventilated. The recommended environment humidity is between 40% to 50%."
   

What is the temperature measurement range of the Zenmuse H30T's thermal camera?
The temperature measurement range is -20°C to 150°C in high gain mode and 0°C to 600°C in low gain mode. With the IR Density Filter, the range extends up to 1600°C (2912°F).

Can the Zenmuse H30T be used for night operations?
Yes, the Zenmuse H30T is especially-suited for night operations, especially in emergency services, inspections, and search and rescue missions, thanks to its advanced night vision and thermal imaging capabilities.

Does the Zenmuse H30T support split-screen viewing for its cameras?
Yes, it features simultaneous split-screen viewing, allowing side-by-side comparisons between the thermal and optical sensors.

What are the differences between the three gain modes of Zenmuse H30T? What application scenarios do they correspond to?
High Gain mode offers more precise temperature measurement capabilities, with a measurement range of -20° to 150° C (-4° to 302° F).

Low Gain mode provides a broader temperature measurement range, from 0° to 600° C (32° to 1112° F).

High-Res mode is designed for observing objects with small temperature differences, making the subject stand out more clearly. Temperature measurement is not supported in this mode.

What is Flat-Field Calibration (FFC) in Zenmuse H30T?
Flat-Field Calibration is used to optimize thermal image quality so temperature changes can be observed more easily. You can choose to manually enable FFC by turning off the automatic FFC adjustment in settings.

Why does the image exhibit uneven dark or bright areas after performing manual FFC multiple times in succession?
It is not recommended to continuously perform manual FFC without pause, as this can cause the infrared thermal camera's shutter to heat unevenly, resulting in an inconsistent image. If this occurs, perform an FFC once every 30 seconds, and the image should return to normal.

What is the temperature measurement accuracy of Zenmuse H30T?
In a windless 25°C (77°F) laboratory environment, observing a blackbody subject from a distance of 13 meters:

Without the Infrared Density Filter installed, the measurement accuracy in High Gain mode is ±2° C or ±2%, and in Low Gain mode, it is ±5° C or ±3% (whichever is greater).

With the Infrared Density Filter installed, the measurement accuracy for temperatures ≤ 1000° C (1832° F) is ±80° C (176° F) or ±8%; for temperatures > 1000° C (1832° F), it is ±100° C (212° F) or ±10% (whichever is greater).

What is the focusing distance of the infrared thermal camera on Zenmuse H30T? Does the focusing distance affect the accuracy of temperature measurements?
The minimum focusing distance is 13 meters. Within 13 meters, the temperature measurement accuracy is not affected, but the image will be out of focus. It is recommended to maintain a focusing distance of more than 13 meters.

What software can be used for post-processing of infrared thermal imaging photos taken by Zenmuse H30T?
You can use DTAT3 (DJI Thermal Analysis Tool 3) V3.3.0 or later.

Is the infrared resolution of 1280×1024 based on the original sensor size or from an algorithmic enhancement?
It is the native sensor size with a resolution of 1280×1024.

What is the function of Zenmuse H30T's UHR (Ultra-High Resolution) Infrared Image?
This feature allows the capture of clear images when the infrared thermal camera is at 5× zoom or higher.

What factors can affect the temperature measurement accuracy of the Zenmuse H30T's infrared thermal camera?     
Factors such as the subject's emissivity, distance, environmental temperature, and humidity can impact the accuracy of temperature measurements.

How do I set the infrared temperature measurement parameters for Zenmuse H30T?     
Infrared temperature measurement parameters can be set in the DJI Pilot 2 app. The app supports automatic reading of laser rangefinding and environmental temperature values, as well as manual setting of object emissivity and environmental humidity values to correct the temperature measurement results.

What is the main functionality for the Zenmuse H30T's sensor burn protection feature?
H30T will automatically close the shutter when it detects conditions that could cause burns to the infrared sensor.

What is the Zenmuse H30T's Infrared Density Filter for?
It extends the thermal imaging module's temperature measurement range to 0° to 1600° C (32° to 2912° F), allowing for more effective temperature variation assessment and rapid locating of high-temperature points.

What is the Night Scene mode of the Zenmuse H30 Series?
It enhances image quality in low-light conditions, presenting clearer and more accurate visual information to ensure efficiency and precision during nighttime operations.

How has the Night Scene mode improved in H30T compared to H20N?
H30T's Night Scene mode supports adjustments of 25fps, 15fps, and 5fps, with a maximum ISO of 819,200, offering better noise reduction and support for NIR illumination.

In the Night Scene mode, why does a higher noise reduction level decrease the smoothness of live feeds?
Higher noise reduction levels result in lower frame rates, longer exposure times, and higher sensitivity, along with stronger noise reduction performance. However, due to the reduced frame rate, the smoothness of the live feed is correspondingly decreased.

What is the function of electronic dehazing of the Zenmuse H30 Series, and how do I choose the intensity of dehazing?
Electronic dehazing is an image-processing technique designed to reduce image blurring and haze effects caused by light scattering, atmospheric humidity, and other factors. It uses computer algorithms to optimize and restore images, enhancing their clarity and quality. Low-level electronic dehazing is mainly for mild haze conditions, while high-level electronic dehazing can handle situations like post-rain fog and moderate haze.

Why is electronic dehazing only supported by the zoom camera?
Zoom cameras typically observe subjects that are farther away and are more susceptible to the effects of rain, fog, and haze in the air. Therefore, electronic dehazing is primarily provided for the zoom camera.

What is the maximum zoom supported by the zoom camera when performing High-Res Grid Photo?
It supports up to 15× zoom.

Can I enable electronic dehazing in the Night Scene mode?
No. Electronic dehazing is intended for daytime haze scenarios, while the Night Scene mode is for low-light conditions at night. Both require image processing, but due to different application scenarios and purposes, their effects would conflict, hence they are not supported simultaneously.

What is the Smart Capture mode, and what are its main application scenarios?
Smart Capture mode allows the camera to automatically adjust parameters based on different scenes and lighting conditions to achieve higher-quality photo results. However, the shooting speed may be slower compared to Single Shot mode. Smart Capture is suitable for all scenarios.

What is the surveying and mapping accuracy of the Zenmuse H30 Series?
H30 series supports general surveying and mapping accuracy with an accuracy of ≤ 10 cm.*

* Measured under the following conditions in a DJI laboratory environment: Zenmuse H30 mounted on a Matrice 350 RTK and powered up. Using DJI Pilot 2’s Area Route to plan the flight route. RTK in the FIX status. The relative altitude was set to 80 m, flight speed to 10 m/s, gimbal pitch to -90°, and each straight segment of the flight route was less than 1500 m. The field contained objects with obvious angular features, and used exposed hard-ground checkpoints that conformed to the diffuse reflection model. Post-processing with DJI Terra achieved a horizontal accuracy of 10 cm.

What is the minimum focusing distance of the visible light cameras of the Zenmuse H30 Series?
For the zoom camera, the minimum focusing distance is 1.5 meters below 5× zoom, 5 meters between 5× and 20×, and 10 meters above 20× zoom. The wide-angle camera has a minimum focusing distance of 1 meter.

What is the IR Light feature of Zenmuse H30T, and what are its use scenarios?
It switches the live feed to a grayscale image by removing the IR filter, thereby strengthening the contrast between light and dark areas, making it easier to locate subjects.

*IR Light is supported only when using the zoom camera.

What are the limitations of the NIR auxiliary light on the DJI Zenmuse H30 Series?

1. In low-light/dark environments (e.g., urban areas at night), the Night Scene mode is sufficient. It is not recommended to activate the NIR Auxiliary Light in these conditions, as it may cause image whitening and reduced contrast.<br>
2. When observing at distances beyond 200 meters in low-light/dark conditions or in weather conditions like rain or fog, the backward scattering of light due to the Tyndall effect from particles in the air can lead to image whitening and reduced contrast.‌

What is the measurement range of the laser range finder of the DJI Zenmuse H30 Series? What is the blind zone?
The range is 3-3000 m, with the upper limit of the measurement distance being 3000 meters and the lower limit being 3 meters.

Range for common objects: grasslands 2000 m, woodlands 1900 m, road surfaces 1700 m*‌*|

*Data measured in a DJI laboratory. The rangefinding data may vary based on the material and shape of the tested object as well as the impact of gimbal angle, environmental light, and weather conditions such as rain or fog. If a laser pulse hits multiple targets, its energy is dispersed, which may reduce the measurable distance.

*Test conditions: Flat surface subject, subject size exceeding the laser beam diameter, atmospheric visibility of 23 km (shorter range in clear conditions compared with overcast), laser impinges at an oblique angle (with an angle of incidence of approx. 0.2 radians).

What are challenging scenarios for the laser range finder of the DJI Zenmuse H30 Series?

1. Weather conditions such as rain, fog, haze, or snow.
2. Objects with reflective surfaces.
3. Complex scenes with multiple subjects.

What is the pin point accuracy of the laser rangefinder in the DJI Zenmuse H30 Series?
After maneuvering the aircraft in forward, backward, left, and right directions for approximately 10 seconds, the Zenmuse H30 Series can achieve a pin point accuracy of 20 meters at a distance of 1 kilometer.