CDC Autel EVO II PRCS Elite Rapid Charger Case

Colorado Drone Chargers SKU: CDC-PEAEV2 MPN: CDC-EVOII
  |  

Price:
$545
+ FREE SHIPPING

Stock:
In Stock & Ready to Ship

The Advexure Team in partnership with Colorado Drone Chargers is excited to announce the new CDC Autel EVO II PRCS Elite Rapid Charging System which can charge up to four (4) EVO II model XE3 7100 batteries and one (1) flight controller simultaneously in record time. The EVO II will charge batteries with a discharge level of 15%, to 97% - 100% in an average time of just 71 minutes. For our customers, that means less batteries to charge in less time, and more time in the air.

The EVO II PRCS Elite is designed to work with modified sine wave generators, inverters and alternative power sources. It features CDC Intelligent Charging for safety and speed, current, voltage & temperature management.

Charges EVO II Model XE3 7100 batteries to a 90% charge in 55 minutes and 98%+ in 65-75 minutes.

All Colorado Drone Chargers products come with a two-year warranty.

Key Features

  • Proprietary charging algorithms
  • Built-in power supply
  • 100% duty cycle
  • Multi-fan cooling
  • CDC Intelligent Charging current, voltage & temperature management
  • Protective hard case
  • IP65 rating (watertight & dust proof)
  • Impact resistant
  • Pressure release valve for easy opening
Inverter/Generator Requirements

Inverter/Generator Requirements for CDC EVO II PRCS

Each EVO II PRCS Elite fully loaded with four (4) batteries and a controller “at peak” uses about 6.2 amps from the 120VAC circuit.

This translates to an average of 750 Watts needed to power a single EVO II PRCS Elite charger. For two (2) EVO II PRCS Elite from the same source, you will need on average about 1500 Watts. For three (3), EVO II PRCS Elite from the same source, you will need on average about 2500 Watts.

Inverters/generator power sources should be rated between 1.2X and 1.5X the wattage requited by the load, your EVO II PRCS Elite charging systems.

What do we recommend?

To power one (1) EVO II PRCS Elite we recommend a power source between 750 Watts and 1,000 Watts.

To power two (2) EVO II PRCS Elite we recommend a power source between 1,500 Watts and 2000 Watts.

To power three (3) EVO II PRCS Elite we recommend a power source between 2,500 Watts and 3000 Watts.

NOTE: All our CDC systems are designed to be powered from a “modified sine wave” continuous power source – this can save you a lot of money over buying a “pure sine wave” power source.

Be sure to use the proper size wire.

    The Advexure Team in partnership with Colorado Drone Chargers is excited to announce the new CDC Autel EVO II PRCS Elite Rapid Charging System which can charge up to four (4) EVO II model XE3 7100 batteries and one (1) flight controller simultaneously in record time. The EVO II will charge batteries with a discharge level of 15%, to 97% - 100% in an average time of just 71 minutes. For our customers, that means less batteries to charge in less time, and more time in the air.

    The EVO II PRCS Elite is designed to work with modified sine wave generators, inverters and alternative power sources. It features CDC Intelligent Charging for safety and speed, current, voltage & temperature management.

    Charges EVO II Model XE3 7100 batteries to a 90% charge in 55 minutes and 98%+ in 65-75 minutes.

    All Colorado Drone Chargers products come with a two-year warranty.

    Key Features

    • Proprietary charging algorithms
    • Built-in power supply
    • 100% duty cycle
    • Multi-fan cooling
    • CDC Intelligent Charging current, voltage & temperature management
    • Protective hard case
    • IP65 rating (watertight & dust proof)
    • Impact resistant
    • Pressure release valve for easy opening

    Inverter/Generator Requirements for CDC EVO II PRCS

    Each EVO II PRCS Elite fully loaded with four (4) batteries and a controller “at peak” uses about 6.2 amps from the 120VAC circuit.

    This translates to an average of 750 Watts needed to power a single EVO II PRCS Elite charger. For two (2) EVO II PRCS Elite from the same source, you will need on average about 1500 Watts. For three (3), EVO II PRCS Elite from the same source, you will need on average about 2500 Watts.

    Inverters/generator power sources should be rated between 1.2X and 1.5X the wattage requited by the load, your EVO II PRCS Elite charging systems.

    What do we recommend?

    To power one (1) EVO II PRCS Elite we recommend a power source between 750 Watts and 1,000 Watts.

    To power two (2) EVO II PRCS Elite we recommend a power source between 1,500 Watts and 2000 Watts.

    To power three (3) EVO II PRCS Elite we recommend a power source between 2,500 Watts and 3000 Watts.

    NOTE: All our CDC systems are designed to be powered from a “modified sine wave” continuous power source – this can save you a lot of money over buying a “pure sine wave” power source.

    Be sure to use the proper size wire.

      Payment & Security

      Amazon American Express Apple Pay Diners Club Discover Elo Facebook Pay Google Pay JCB Mastercard PayPal Shop Pay Venmo Visa

      Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

      Calculate Shipping

      Most Commonly Purchased With

      Your Recently Viewed Products