Advexure in partnership with DJI is proud to announce the release of the DJI Zenmuse P1 which is a full-frame sensor, 45 megapixel camera designed for photogrammetry and surveying missions with the DJI Matrice 300 RTK. The P1 features an interchangeable lens system using DJI's DL mounting system. The P1 is designed for photogrammetry flight missions and takes efficiency and accuracy to a whole new level.
The New Benchmark for Aerial Surveying
- 45 MP Full-frame Sensor
- Accuracy without GCPs (3 cm horizontally / 5 cm vertically)
- 3-axis Stabilized Gimbal, supports Smart Oblique Capture
- High Efficiency 3 km2 covered in a single flight
- Global Mechanical Shutter (Shutter Speed 1/2000 Seconds)
- TimeSync 2.0 - synchronization at the microsecond level
Full-Frame Camera
- 45MP Full-frame Sensor
- 4.4μm Pixel Size
- Low-noise, high sensitivity imaging extends daily operational time
- Take a photo every 0.7 s during the flight
- TimeSync 2.0 aligns the camera, flight controller, RTK module, and gimbal at the microsecond level
Advexure in partnership with DJI is proud to announce the release of the DJI Zenmuse P1 which is a full-frame sensor, 45 megapixel camera designed for photogrammetry and surveying missions with the DJI Matrice 300 RTK. The P1 features an interchangeable lens system using DJI's DL mounting system. The P1 is designed for photogrammetry flight missions and takes efficiency and accuracy to a whole new level.
The New Benchmark for Aerial Surveying
- 45 MP Full-frame Sensor
- Accuracy without GCPs (3 cm horizontally / 5 cm vertically)
- 3-axis Stabilized Gimbal, supports Smart Oblique Capture
- High Efficiency 3 km2 covered in a single flight
- Global Mechanical Shutter (Shutter Speed 1/2000 Seconds)
- TimeSync 2.0 - synchronization at the microsecond level
Full-Frame Camera
- 45MP Full-frame Sensor
- 4.4μm Pixel Size
- Low-noise, high sensitivity imaging extends daily operational time
- Take a photo every 0.7 s during the flight
- TimeSync 2.0 aligns the camera, flight controller, RTK module, and gimbal at the microsecond level
DJI Zenmuse P1 Specs
General
Product Name | Zenmuse P1 |
Dimensions | 198×166×129 mm |
Weight | Approx. 800 g |
Power | 20W |
IP Rating | IP4X |
Supported Aircraft | Matrice 300 RTK |
Operating Temperature Range | -20° to 50° C (-4° to 122° F) |
Storage Temperature Range | -20° to 60° C (-4° to 140° F) |
Absolute Accuracy | Horizontal: 3 cm, Vertical: 5 cm* *Using Mapping Mission at a GSD of 3 cm and flight speed of 15 m/s, with an 75% front overlap rate and a 55% side overlap rate. |
Camera
Sensor | Sensor size (Still): 35.9×24 mm (Full frame) Sensor size (Max video recording area): 34×19 mm Effective Pixels: 45MP Pixel size: 4.4 μm |
Supported Lenses | DJI DL 24mm F2.8 LS ASPH(ENTERPRISE) (with lens hood and balancing ring/filter), FOV 84° DJI DL 35mm F2.8 LS ASPH(ENTERPRISE) (with lens hood and balancing ring/filter), FOV 63.5° DJI DL 50mm F2.8 LS ASPH(ENTERPRISE) (with lens hood and balancing ring/filter), FOV 46.8° |
Supported SD Cards | SD: UHS-I rating or above; Max capacity: 512 GB |
Storage Files | Photo / GNSS Raw Observation Data/ Image Log File |
Photo Size | 3:2 (8192×5460) |
Operation Modes | Photo, Video, Playback |
Minimum photo interval | 0.7 s |
Shutter Speed | Mechanical Shutter Speed: 1/2000*-1 s Electronic Shutter Speed: 1/8000-1 s *Aperture value no larger than f/5.6 |
Aperture Range | f/2.8-f/16 |
ISO Range | Photo: 100-25600 Video: 100-25600 |
Video
Video Format | MP4 |
Video Resolution | 16:9 (1920×1080) 16:9 (3840×2160)* *Only 35mm lens supported |
Frame Rate | 60fps |
Gimbal
Stabilized System | 3-axis (tilt, roll, pan) |
Angular Vibration Range | ±0.01° |
Mount | Detachable DJI SKYPORT |
Mechanical Range | Tilt: -125° to +40° Roll: -55° to +55° Pan: ±320° |
What's Included
(1) Zenmuse P1 Camera
(1) 35mm Lens
(1) SD Card (128GB)
(1) Storage Case
(1) Camera Body Cap
(1) Lens Rear Cap
(1) Lens Cleaning Cloth
DJI Enterprise Zenmuse P1
DJI Zenmuse P1 Compatibility
DJI's Care Enterprise plan comes standard with all enterprise/commercial drone systems and provides additional support and coverage in case of accidents or damages, to use Care Enterprise, the payload must be recovered to be sent into DJI for replacement. For full DJI Care Enterprise terms of service and FAQ, please visit DJI.
Care Enterprise for the Zenmuse P1 is available in two (2) options:
Basic (1-Year): Provides one (1) year of coverage against damage caused by user error. The plan offers up to two (2) replacements within the year of coverage. The replacement fee for each replacement is $520. Care Enterprise Basic on the P1 can be renewed after the first year for up to two (2) additional years and has a renewal fee of $750. In year two (2), users have one (1) replacement option with a replacement fee of $520, and in addition, standard warranty is extended by a second year. Care Enterprise Basic can also be renewed for a third and final year for an additional $750.
Plus (1-Year): Provides one (1) year of coverage against damage caused by user error. The Plus plan offers unlimited aircraft replacements within the coverage amount equivalent to the product's value for the one (1) year period of the coverage plan. Plus coverage can also be "pooled" or shared amongst a fleet if all platforms are purchased with Plus and bound together in the same 30-day period. Care Enterprise Plus on the P1 can be renewed after the first year for up to two (2) additional years and has a renewal fee of $1,300 which provides an additional coverage amount of $5,500, and in addition, standard warranty is extended by a second year. Care Enterprise Plus can also be renewed for a third and final year for an additional $1,300.
Frequently Bought Together
Customer Reviews
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.