Dronetag RIDER Case is a 3D-printed, MOLLE-compatible clip that secures your RIDER for field use. Tool-free snap-in fit, precise openings for button and antenna, and an ultralight 29 g design keep access clear and carry effortless.
The Dronetag RIDER Case is a 3D-printed, purpose-built clip that secures your RIDER for mobile Remote ID workflows. It’s MOLLE-compatible for vests, packs, and belts, delivers fast tool-free assembly, and keeps buttons and the antenna fully accessible—all in a featherweight form you’ll barely notice.
MOLLE-Ready, Wear It or Mount It
Snap the case onto MOLLE gear to carry RIDER on your person or attach it to bags and rigs for field work. The low-profile clip holds firm while staying out of your way during inspections, patrols, or incident response.
Ultra-Light, Low-Profile
At just ≈1.02 oz (29 g), the case adds virtually no burden. Its compact footprint preserves clearance around other kit and minimizes snag points during movement.
Tool-Free Assembly
Set up in seconds—no screws, no brackets:
- Place the Dronetag RIDER into the case until snug.
- Confirm unobstructed access to the main button and antenna opening.
- Attach to MOLLE and verify a secure latch before use.
Access & Signal-Friendly Cutouts
Dedicated openings align with RIDER’s button and antenna so you can operate the device and maintain proper antenna placement without removing the case.
3D-Printed, Field-Practical
The additively manufactured body balances strength with weight savings for daily use. Note: minor cosmetic variations are normal due to the nature of 3D printing.
Safety Notice
Please ensure the case is firmly attached to prevent loss or damage. Advexure/Dronetag are not responsible for device damage or loss while using this case.
At-a-Glance
- Compatibility: Dronetag RIDER
- Mounting: MOLLE-compatible clip
- Weight: ≈1.02 oz (29 g)
- Access: Button & antenna openings
- Assembly: Tool-free, snap-in fit
The Dronetag RIDER Case is a 3D-printed, purpose-built clip that secures your RIDER for mobile Remote ID workflows. It’s MOLLE-compatible for vests, packs, and belts, delivers fast tool-free assembly, and keeps buttons and the antenna fully accessible—all in a featherweight form you’ll barely notice.
MOLLE-Ready, Wear It or Mount It
Snap the case onto MOLLE gear to carry RIDER on your person or attach it to bags and rigs for field work. The low-profile clip holds firm while staying out of your way during inspections, patrols, or incident response.
Ultra-Light, Low-Profile
At just ≈1.02 oz (29 g), the case adds virtually no burden. Its compact footprint preserves clearance around other kit and minimizes snag points during movement.
Tool-Free Assembly
Set up in seconds—no screws, no brackets:
- Place the Dronetag RIDER into the case until snug.
- Confirm unobstructed access to the main button and antenna opening.
- Attach to MOLLE and verify a secure latch before use.
Access & Signal-Friendly Cutouts
Dedicated openings align with RIDER’s button and antenna so you can operate the device and maintain proper antenna placement without removing the case.
3D-Printed, Field-Practical
The additively manufactured body balances strength with weight savings for daily use. Note: minor cosmetic variations are normal due to the nature of 3D printing.
Safety Notice
Please ensure the case is firmly attached to prevent loss or damage. Advexure/Dronetag are not responsible for device damage or loss while using this case.
At-a-Glance
- Compatibility: Dronetag RIDER
- Mounting: MOLLE-compatible clip
- Weight: ≈1.02 oz (29 g)
- Access: Button & antenna openings
- Assembly: Tool-free, snap-in fit
Dronetag RIDER Case — Specifications
| Dimensions | Height: ≈2.60 in (66 mm) Width: ≈2.20 in (56 mm) Depth (without clip): ≈0.75 in (19 mm) Depth (with clip): ≈1.22 in (31 mm) |
| Weight | ≈1.02 oz (29 g) |
| Mounting | MOLLE-compatible clip |
| Device Access | Openings for main button and antenna |
| Assembly | Tool-free, snap-in installation |
(1) Dronetag RIDER Case
Frequently Bought Together
Customer Reviews
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Most Commonly Purchased With
Your Recently Viewed Products
