Dronetag 2.4 GHz Directional Antenna (SMA) focuses Remote ID reception with 8 dBi gain and a 90° beam. Adjustable tilt and 360° rotation simplify aiming; vertical polarization and 50 Ω design boost range and cut noise. Compatible exclusively with Dronetag RIDER.
Increase Remote ID reception range and signal quality where it matters most. The Dronetag 2.4 GHz Directional Antenna (SMA) concentrates gain toward a defined sector for long-range, low-noise pickup—ideal for roadside monitoring, perimeter coverage, or targeting a specific corridor. It uses a SMA male connector and is compatible only with Dronetag RIDER.
Focused Gain for Long-Range Remote ID
With 8 dBi gain and a 90° horizontal × 90° vertical beamwidth, this panel-style antenna boosts sensitivity in the direction you need while rejecting off-axis noise. That directional focus improves detection confidence in dense RF environments and extends practical range compared to omnis in the same conditions.
Aim, Adjust, Confirm
An integrated tilt joint and 360° rotation make alignment quick on masts, tripods, or vehicle mounts. The arrow on the top face points toward the lobe of strongest gain—aim that arrow at the area you want to monitor for the most reliable Remote ID reception.
Tuned for 2.4 GHz Remote ID
Optimized across 2400–2500 MHz, the antenna supports Bluetooth® 4.0 Legacy, Bluetooth 5.0 Long Range, and Wi-Fi beaconing used by Remote ID broadcasts. A 50 Ω, vertically polarized design helps maintain link budget and consistency across devices.
Rugged & Portable
Built for field deployments from winter mornings to summer heat, the assembly is rated for −40 °F to 176 °F (−40 °C to +80 °C). Its compact profile—≈4.29 × 3.54 in (109 × 90 mm) and ≈1.41 oz (40 g)—packs easily with RIDER kits without adding bulk.
At-a-Glance
- Band: 2.4 GHz (2400–2500 MHz) for Remote ID (BLE 4.0/5.0 LR, Wi-Fi)
- Gain / Beam: 8 dBi; 90° H × 90° V
- Polarization / Impedance: Vertical; 50 Ω
- Connector: SMA male (RIDER-only compatibility)
- Operating Temp: −40 °F to 176 °F (−40 °C to +80 °C)
- Dimensions / Weight: ≈4.29 × 3.54 in (109 × 90 mm); ≈1.41 oz (40 g)
Increase Remote ID reception range and signal quality where it matters most. The Dronetag 2.4 GHz Directional Antenna (SMA) concentrates gain toward a defined sector for long-range, low-noise pickup—ideal for roadside monitoring, perimeter coverage, or targeting a specific corridor. It uses a SMA male connector and is compatible only with Dronetag RIDER.
Focused Gain for Long-Range Remote ID
With 8 dBi gain and a 90° horizontal × 90° vertical beamwidth, this panel-style antenna boosts sensitivity in the direction you need while rejecting off-axis noise. That directional focus improves detection confidence in dense RF environments and extends practical range compared to omnis in the same conditions.
Aim, Adjust, Confirm
An integrated tilt joint and 360° rotation make alignment quick on masts, tripods, or vehicle mounts. The arrow on the top face points toward the lobe of strongest gain—aim that arrow at the area you want to monitor for the most reliable Remote ID reception.
Tuned for 2.4 GHz Remote ID
Optimized across 2400–2500 MHz, the antenna supports Bluetooth® 4.0 Legacy, Bluetooth 5.0 Long Range, and Wi-Fi beaconing used by Remote ID broadcasts. A 50 Ω, vertically polarized design helps maintain link budget and consistency across devices.
Rugged & Portable
Built for field deployments from winter mornings to summer heat, the assembly is rated for −40 °F to 176 °F (−40 °C to +80 °C). Its compact profile—≈4.29 × 3.54 in (109 × 90 mm) and ≈1.41 oz (40 g)—packs easily with RIDER kits without adding bulk.
At-a-Glance
- Band: 2.4 GHz (2400–2500 MHz) for Remote ID (BLE 4.0/5.0 LR, Wi-Fi)
- Gain / Beam: 8 dBi; 90° H × 90° V
- Polarization / Impedance: Vertical; 50 Ω
- Connector: SMA male (RIDER-only compatibility)
- Operating Temp: −40 °F to 176 °F (−40 °C to +80 °C)
- Dimensions / Weight: ≈4.29 × 3.54 in (109 × 90 mm); ≈1.41 oz (40 g)
Dronetag 2.4 GHz Directional Antenna (SMA) — Specifications
| Frequency Band | 2.4 GHz ISM: 2400–2500 MHz |
| Remote ID Technologies | Bluetooth 4.0 Legacy & Bluetooth 5.0 Long Range; Wi-Fi |
| Radiation Pattern | Directional (panel) |
| Gain | 8 dBi |
| Beamwidth (H / V) | 90° / 90° |
| Polarization | Vertical |
| Impedance | 50 Ω |
| Connector | SMA male |
| Operating Temperature | −40 °F to 176 °F (−40 °C to +80 °C) |
| Dimensions | ≈4.29 × 3.54 in (109 × 90 mm) |
| Weight | ≈1.41 oz (40 g) |
| Compatibility | Dronetag RIDER only |
(1) Dronetag 2.4 GHz Directional Antenna (SMA Male)
Frequently Bought Together
Customer Reviews
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Most Commonly Purchased With
Your Recently Viewed Products
