The all-new DJI Matrice 3D is specifically designed for DJI Dock 2. Matrice 3D is equipped with both a tele camera and a wide-angle camera with a mechanical shutter, meeting the needs for 1:500 high-precision mapping tasks.
Please Note: This aircraft cannot operate as a standalone unit without the DJI Dock 2.
|
|
|
|
|
|
|
|
|
|
The all-new DJI Matrice 3D is specifically designed for DJI Dock 2. Matrice 3D is equipped with both a tele camera and a wide-angle camera with a mechanical shutter, meeting the needs for 1:500 high-precision mapping tasks.
High-Performance Aircraft
| Wide Angle Camera | Tele Camera |
| 4/3 CMOS 24mm Format Equivalent 20MP Effective Pixels Mechanical Shutter |
1/2-inch CMOS 162mm Format Equivalent 12MP Effective Pixels |
Superior, Comprehensive Performance
Thanks to its powerful operation capabilities, DJI Matrice 3D meets the requirements of high-standard operations.
IP54Dustproof and Waterproof |
50 MinsMax Flight Time |
6-DirectionalObstacle Sensing System |
10 kmMax Effective Operating Radius |
400Battery Cycles |
Integrated RTK Module±3cm Positioning Accuracy |
The all-new DJI Matrice 3D is specifically designed for DJI Dock 2. Matrice 3D is equipped with both a tele camera and a wide-angle camera with a mechanical shutter, meeting the needs for 1:500 high-precision mapping tasks.
High-Performance Aircraft
| Wide Angle Camera | Tele Camera |
| 4/3 CMOS 24mm Format Equivalent 20MP Effective Pixels Mechanical Shutter |
1/2-inch CMOS 162mm Format Equivalent 12MP Effective Pixels |
Superior, Comprehensive Performance
Thanks to its powerful operation capabilities, DJI Matrice 3D meets the requirements of high-standard operations.
IP54Dustproof and Waterproof |
50 MinsMax Flight Time |
6-DirectionalObstacle Sensing System |
10 kmMax Effective Operating Radius |
400Battery Cycles |
Integrated RTK Module±3cm Positioning Accuracy |
DJI Matrice 3D Specifications
Aircraft
| Weight | 3.1 lbs. (1410g) |
|
Maximum take-off weight |
3.54 lbs. |
| Dimensions |
13.2"x15.66"x6" (335x398x153mm) |
| Working Temperature |
20°C--45 °C |
| IP Rating | IP54 |
| Max Flight Time | 50 min |
| Max Ascent Speed |
13.4 mph (normal mode) 17.8 mph (sport mode) |
| Max Descent Speed | 13.4 mph (normal mode) 13.4 mph (sport mode) |
| Max Flight Speed |
|
| Max Horizontal Flight Speed |
21 m/s |
| Max Hover Time | 40 min |
| Max Wind Resistance |
Wind resistance during operation: 26.8 mph Wind resistance during takeoff and landing: 17.9 mph. |
| Max Take-off Altitude | 1.55 mi. |
| Max Operational Range | 6.21 mi. |
Wide-Angle Camera
|
Sensor |
1/1.32 inch CMOS |
| Equivalent Focal Length |
24 mm; 20MP |
| Shutter | Mechanical Shutter |
Telephoto Camera
|
Sensor |
1/2-inch CMOS |
| Equivalent Focal Length | 161 mm; 12MP |
| Zoom | 56x hybrid zoom |
(1) Matrice 3D Aircraft
(1) CW Propellers (Pair)
(1) CCW Propellers (Pair)
(1) Screws and Washers
Are the accessories of the Mavic 3 Enterprise Series compatible with the Matrice 3D series?
Only the DJI RC Pro Enterprise remote controller is shared between the two platforms.
Does the DJI Matrice 3D Series support manual flight with the RC Pro Enterprise?
Yes, but due to limited functions, it's recommended to only use RC Pro Enterprise to complete configuration and link the M3D Series as a controller B.
Does the M3D Series support mobile time-laps, smart follow, and time-lapse photography?
No, it does not.
Why does it rattle when I shake the Matrice 3D aircraft?
This is normal, as a damper has been installed in he aircraft arm to reduce vibrations.
DJI's Care Enterprise plan comes standard with all enterprise/commercial drone systems and provides additional support and coverage in case of accidents or damages, to use Care Enterprise, the aircraft must be recovered to be sent into DJI for replacement. For full DJI Care Enterprise terms of service and FAQ, please visit DJI.
Care Enterprise for the Matrice 3D is available in three (3) options:
Basic (1-Year): Provides one (1) year of coverage against damage caused by user error. The plan offers up to two (2) replacements within the year of coverage. The replacement fee for the both replacements is $266. Care Enterprise Basic on the Matrice 3D can be renewed after the first year for up to two (2) additional years and has a renewal fee of $380. In each additional year, users have two replacement options with a replacement fee of $266 each. Care Enterprise cannot be renewed beyond three (3) years.
Basic (2-Year): Provides two (2) years of coverage against damage caused by user error. The plan offers up to four (4) replacements within the two (2) years of coverage. The replacement fee for each replacement is $266. Care Enterprise can be renewed for one additional year to a total of three (3) years of coverage.
Basic coverage also includes one standard maintenance service per one (1) year of coverage.
Plus (1-Year): Provides one (1) year of coverage against damage caused by user error. The Plus plan offers unlimited aircraft replacements within the coverage amount for the one (1) year period of the coverage plan. Plus coverage can also be "pooled" or shared amongst a fleet, if all platforms are purchased with Plus and bound together in the same 30-day period. Care Enterprise Plus on the Matrice 3D can be renewed after the first year for up to two (2) additional years and has a renewal fee of $760 which provides an additional coverage amount of $3,800.
Plus coverage also includes one standard maintenance service per one (1) year of coverage.
Customer Reviews
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.